CABLE GLAND

 
 
  Type   BW Brass Cable Gland
  Size   20-S to 90-L
  Application   Confirms to BS6121 Part 1
      Suitable for single wire armoured, plastic or rubber sheathed cables
      Application for use in dry, indoor situations
Low cost two part design also available on request
Shroud may be used for additional ingress protection
Seal rated to IP 54
  Finish   Natural Brass and also available in Electro Tinned and Nickel Platting.
 
  Type   CW Brass Cable Glands
  Size   20-S to 90-L
  Application   Confirms to BS6121 Part 1
      Suitable for single wire armoured, plastic or rubber sheathed cables
Outer Seal grips sheath of cable
      For use in most climatic conditions weatherproof and waterproff.
Seal rated to IP 66
Design has separate armour locking ring
Gland rated to IP66 with use of suitable sealing washer or thread sealant at gland interface
  Finish   Natural Brass and also available in Electro Tinned and Nickel Plating.
 
  Type   E1W Cable Glands
  Size   20-S to 90-L
  Application   Suitable for single wire armoured, plastic or rubber sheathed cables
Outer Seal grips sheath of cable
      Inner Seal grips bedding layer of cable.
For use in most climatic conditions weatherproof and waterproof
      Inner & Outer seal rated to IP66
Design has separate armour locking ring
  Finish   Natural Brass and also available in Electro Tinned and Nickel Plating.

 

  Type   A2, A1/A2 Cable Glands
  Size   20-S to 90-L
  Application   Confirms To BS 6121 : Part 1
      Suitable for unarmoured, plastic or rubber sheathed cables
Suitable for most indoor and outdoor applications
      Seal rated to IP66
  Finish   Natural Brass and also available in Electro Tinned and Nickel Plating.
 
  Type   PG Cable Glands  

 

 

  Size   PG 7 to PG 48
  Application   To DIN 46320/46255 available with strain relief facility with round or hex intermediate sockets and long and short anti threads.
      Used indoor conditions inner ring frames positive armour clamp an earth continuity.
       
  Finish   Natural Brass and also available in Electro Tinned and Nickel Plated.

 
  Type : G Type Brass Cable Gland ( Alco Type )

G 204 TO G 755
Size
  Application : For use with SWA, Plastic & Rubber Sheathed Cable
      Used in dry Indoor Conditions
      Inner ring ensures positive armour clamp and earth continuity
  Finish   Natural Brass and also available in Electro Tinned and Nickel Plated.
Alco Cable Gland
  MARINE CABLE GLAND
 
  Size : 10 mm to 70 mm
  Application : Used for various marine applications.
Marine Cable Gland
  TRS CABLE GLAND
 
  Size : 16 mm to 32 mm
  Application : While not manufactured to a specific standard, are accepted by many contractors and uses as satisfactory method of securing flexible cables.
TRS Cable Gland
WIPING GLAND
 
  Size   Custom  made as per specifications.
Wiping Gland

TOP
 

© Copyright 2012 Precision Brass Works